Honda C30A Engine
This page lists the C30A specifications for the engine built by Honda.
| Fuel Type | Petrol |
|---|---|
| Configuration |
V6 V6 90 Degrees VTEC |
| Combustion Type | Naturally Aspirated |
| Displacement (cc) | 2,977 cc |
| Cylinders | 6 |
| Cylinder Bore (mm) | |
| Cylinder Stroke (mm) | |
| Valves | 24 |
| Valves Per Cylinder | 4 |
| Valvetrain | DOHC |
| Compression Ratio | |
| Power (kW) | 201 kW @ 7,300 RPM |
| Torque (N⋅m) | 284 N⋅m @ 6,500 RPM |
| Redline (RPM) | |
| Weight (kg) | |
| Production | 1991 - 2005 |
Where listed, power output figures are based on the most powerful production variant of that engine, because some manufacturers use different engine maps to tune the same engine for better fuel economy, performance or to differentiate models in the range.
The C30A also made use of titanium connecting rods, which was another first in a mass-production vehicle. The lightweight rods allowed a higher RPM to be achieved while maintaining the strength of traditional steel rods.
Last Updated: 4th February 2021 at 21:33:43